888.505.1457 > Get a Quote
Copper Price 12/20/2024 4.0325
Get a Quote
Menu
Picture of V182S/18DR-QR
For representation only. Cable constructions may vary from illustration. Please see spec sheet for complete details.

V182S/18DR-QR

Not what you were looking for?
18 AWG 2 conductor 7 strand bare copper with polyvinylchloride and nylon insulation, an aluminum/mylar shield with a stranded tinned copper drain wire with an overall PVC jacket 600V control tray cable, PLTC, NPLF & FPL, approved for use in SUN RES DIR BUR OIL RES I 90°C applications.
SKU: V182S/18DR-QR
 
• Refer to NEC (NFPA 70) article 336 for installation guidelines
• Cable is suitable for use in Class I Division II hazardous locations
• UL listed as Type TC-ER per UL Standard 1277 for tray cables and Quad Rated TC, PLTC, NPLF & FPL
• UL approved for Direct Burial, Sunlight and Oil I Resistant applications
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• Meets ICEA S-73-532, where applicable
• All materials used in the manufacture of this cable are RoHS II & REACH compliant
• Made in the USA
This spec is for informational purposes and subject to change. This spec may not be suitable for submission. Contact Lake Cable for non-watermark spec sheet.
Products specifications
Attribute nameAttribute value
Conductor
AWG Size & Stranding18 AWG 7 Strands Class B
MaterialAnnealed Bare Copper
Conductor Count2 Conductors
Insulation
MaterialPolyvinylchloride & Nylon
Wall Thickness0.015” PVC & 0.005” Nylon
Color CodeMethod 1, Table E-2
Assembly
Lay Length2.75” LHL
FillersN/A
BinderN/A
ShieldAluminum/Mylar Tape - 100% coverage
Drain Wire18 AWG 7 Strand Tinned Copper
Jacket
MaterialPolyvinylchloride
Wall Thickness0.045”
Diameter0.263”
ColorBlack
RipcordYes
Cold Bend Rating-40°C
Weight42 lbs/Mft
Markings
TypeCable permanently identified via surface inkjet print
LegendLAKE CABLE E207231 18AWG 2C SHIELDED (UL) NPLF 90’C 150V PVC/N OR PLTC OR FPL OR TC-ER 600V 90’C DRY/WET SUN RES DIR BUR OIL RES I PVC JACKET FT4 “ROHS II” REACH MADE IN USA
Footage MarkersYes

Remember, all of our wire can feature:

  • Short minumum runs
  • Special jacket colors including stripes
  • Custom print legends
  • Custom cable constructions
  • Custom packaging - boxes or reels
  • Custom lengths
  • Your name on package labels
Bensenville - Corporate Office & Factory
529 Thomas Drive, Bensenville, IL 60106 Phone: 888.505.1457 | Fax: 630.860.5944
Lake Copper Conductors - Office & Factory
4430 Eastland Drive, Elkhart, IN 46516 Phone: 888.505.1457 | Fax: 847.378.7004
Valparaiso - Office & Factory
2700 East Evans Ave, Valparaiso, IN 46383 Phone: 888.505.1457 | Fax: 219.548.2799
Bensenville Low Voltage Facility
139 Foster Avenue, Bensenville, IL 60106 Phone: 888.505.1457 | Fax: 630.860.5944
Lake Copper Conductors - Hoffman Facility
4906 Hoffman Street, Suite A, Elkhart, IN 46516 Phone: 888.505.1457 | Fax: 847.378.7004
Proudly Made in the USA
Copyright © 2024 Lake Cable. All rights reserved.