888.505.1457 > Get a Quote
Copper Price 11/19/2024 4.0960
Get a Quote
Menu
Picture of VXC102SCU
For representation only. Cable constructions may vary from illustration. Please see spec sheet for complete details.

VXC102SCU

Not what you were looking for?
10 AWG 2 conductor 7 strand bare copper with XLPE insulation, a helical bare copper tape shield and an overall CPE jacket 600V control tray cable, approved for use in SUN RES DIR BUR OIL RES I & II 90°C applications.
SKU: VXC102SCU
 
• Refer to NEC (NFPA 70) article 1277 for installation guidelines
• Cable is suitable for use in Class I Division II hazardous locations
• Individual conductors pass UL VW-1 flame test, rated XHHW-2/VW-1
• UL listed as Type TC per UL Standard 1277 for tray cables
• UL approved for Direct Burial, Sunlight and Oil I & II Resistant applications
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• Meets ICEA S-73-532, where applicable
• All materials used in the manufacture of this cable are RoHS compliant
• Made in the USA
This spec is for informational purposes and subject to change. This spec may not be suitable for submission. Contact Lake Cable for non-watermark spec sheet.
Products specifications
Attribute nameAttribute value
Conductor
AWG Size & Stranding10 AWG 7 Strands Class B
MaterialAnnealed Bare Copper
Conductor Count2 Conductors
Insulation
MaterialCross-linked Polyethylene
Wall Thickness0.030”
Color CodeMethod 1, Table E-2
Assembly
Lay LengthPer UL Standard 1277
FillersNon-Hygroscopic Polypropylene - As required for a circular cross-section
BinderClear Mylar
Shield0.005” Helical Bare Copper Tape – 20% minimum overlap
Drain WireN/A
Jacket
MaterialChlorinated Polyethylene
Wall Thickness0.045”
Diameter0.443”
ColorBlack
RipcordYes
Cold Bend Rating-25°C
Weight159 lbs./Mft.
Markings
TypeCable shall be permanently identified via surface inkjet print
LegendLAKE CABLE E208309 10AWG 2C (UL) TC XHHW-2/VW-1 600V 90’C DRY/WET BARE COPPER TAPE SHIELD CPE JACKET SUN RES DIR BUR OIL RES I & II FT4 “ROHS”
Footage MarkersYes

Remember, all of our wire can feature:

  • Short minumum runs
  • Special jacket colors including stripes
  • Custom print legends
  • Custom cable constructions
  • Custom packaging - boxes or reels
  • Custom lengths
  • Your name on package labels
Bensenville - Corporate Office & Factory
529 Thomas Drive, Bensenville, IL 60106 Phone: 888.505.1457 | Fax: 630.860.5944
Lake Copper Conductors - Office & Factory
4430 Eastland Drive, Elkhart, IN 46516 Phone: 888.505.1457 | Fax: 847.378.7004
Valparaiso - Office & Factory
2700 East Evans Ave, Valparaiso, IN 46383 Phone: 888.505.1457 | Fax: 219.548.2799
Bensenville Low Voltage Facility
139 Foster Avenue, Bensenville, IL 60106 Phone: 888.505.1457 | Fax: 630.860.5944
Lake Copper Conductors - Hoffman Facility
4906 Hoffman Street, Suite A, Elkhart, IN 46516 Phone: 888.505.1457 | Fax: 847.378.7004
Proudly Made in the USA
Copyright © 2024 Lake Cable. All rights reserved.